• 黄瓜下载官网,黄瓜AVAPP,黄色视频黄瓜视频,黄瓜视频在线观看入口

    Hello, Welcome to FCTEL Technology Co.,Ltd
    National service hotline:+086 0571-87007055/56/57 CN

    WE ONLY FOCUS ON TRANSMISSION AND ACCESS

    Products center

    Industrial 1-2 channel CAN-bus fiber modem

    Type:FCP-C1/2G Message

    Description:An optical port,1-2 CAN BUS Interface;Simultaneous transmission of 1-2 CAN bus interfaces on the fiber.

    Product Description
            The CAN optical fiber cat can convert the CAN bus signal into an optical signal and transmit it on the optical fiber, which has the effect of extending the communication distance of the CAN bus. At the same time, the use of optical fiber communication solves the problems of electromagnetic interference, ground ring interference and lightning damage. It greatly improves the reliability, security and confidentiality of data communication, and can be widely used in various industrial control, process control, and traffic control occasions. It is especially suitable for banks, electric power, and departments and systems that have special requirements for electromagnetic interference environments.
    Functional Properties
    ◆ Integrated circuits based on independent intellectual property rights;
    ◆ Provide 1-2 CAN bus interfaces and 1 optical port;
    ◆ CAN data is fully transparent, baud rate is self-adaptive, no setting is required;
    ◆ CAN interface maximum number of nodes 128; CAN interface maximum rate 0-1Mbps;
    ◆ The CAN interface speed complies with the international CAN1.0 and CAN2.0 standards;
    ◆ Support wide range AC / DC input, support internal isolation, redundant dual power input, power supply support overload protection, anti-reverse protection;
    ◆ Meet the requirements of industrial level IV electromagnetic compatibility;
    ◆ Super lightning protection function: anti-lightning, anti-induction high voltage, anti-surge, etc .;
    ◆ Fanless heat dissipation, reducing repair time;
    ◆ IP40 enclosure protection level, can withstand the test of harsh environment;
    ◆ Rail or wall mounting;
    ◆ Wide temperature type: working temperature -40 ℃ ~ + 85 ℃;
    ◆ All models pass 100% baking machine test, warranty period: 5 years;
    ◆ CAN interface with lightning protection, anti-radar to GB / T17626.5 (IEC61000-4-5) short-circuit current wave 10 / 700μs, open-circuit peak output voltage 6KV standard.
    Technical Parameters
    ◆ Fiber
    Optical port: 1
    Optical fiber: single fiber double fiber
    Optical fiber interface: FC / SC / ST optional
    Wavelength: 850nm / 1310nm multimode; 1310nm / 1550nm single mode
    Transmission distance without relay: 20 ~ 120Km
    Typical transmit power:  1310 / 1550nm single mode: ≥-9dBm
    Multimode 850nm: -18dBm
    Multimode 1310nm: -25dBm
    Acceptance sensitivity range: -28dBm ~-40dBmm
    ◆ CAN Bus interface
    Protocol: Comply with international CAN1.0, CAN2.0 standards
    Rate: 0 ~ 1000Kbps
    Physical Interface: Industrial Terminal
    CAN definition: CANH, CANL, GND
    ◆ Electrical and mechanical characteristics
    System power: AC7V ~ 50V; DC9-55V;
    Power consumption: ≤2W
    Appearance structure: 133mm (length) x 120mm (width) x 50.0mm (height)
    ◆ Working environment
    Working temperature: -40 ℃ — + 85 ℃
    Storage temperature: -40 ℃ — + 85 ℃
    Operating humidity: 0% —95% (non-condensing)
    MTBF: > 100,000 hours
    Application Scheme
    Industrial 1-2 channel CAN-bus fiber modem
    
    网站地图