• 黄瓜下载官网,黄瓜AVAPP,黄色视频黄瓜视频,黄瓜视频在线观看入口

    Hello, Welcome to FCTEL Technology Co.,Ltd
    National service hotline:+086 0571-87007055/56/57 CN

    WE ONLY FOCUS ON TRANSMISSION AND ACCESS

    Products center

    FE Fiber Media Converter(Network Type)

    Type:FCM-F1 Message

    Description:2U Rack,SNMP,management remote FE fiber media Converter

    Product Description
                  This series is IEEE802.3 Ethernet media converters can achieve 10 / 100Base-T twisted pair and 10 / 100Base-FX or 10,100Base-T twisted pair and 10,100Base-FX between the two kinds of media the media conversion or extension of the network transmission distance, mainly for long-distance fiber-optic networks (20/40/60/80/120 km) transmission, fully supports 10 / 100M or 10M, 100M transmission rate, optical and electrical ports can working at a rate of 10M or 100M transmission applications.
                  Chassis for 2U 17 in the chassis. Rack height 2U, 17 can be inserted into the optical fiber transceiver card, or a network card, 16 fiber optic transceiver cards, each card to work independently; isolation using communications technology to the system power and interface card is completely separate, to ensure that the the reliability of the entire system.
    Functional Properties
    Ø automatically adapt to 10Mbps and 100Mbps environment, easy to upgrade the network;
    Ø monitor with anti-crash auto-reset function for high-definition network cameras and other heavy duty applications;
    Ø support full and half duplex network communication, with auto-negotiation capability;

    Ø VLAN support the transmission of long packets can support IEEE802.10 protocol products matching switches used to support 

          up to 1600-byte Ethernet packets;

    Ø infrastructure equipment can manage to peer desktop fiber optic transceivers

    Ø Support LFP (Link Fault Pass Through) function, when the fiber optic and twisted pair transceiver connected to either ends of a failure, 

           notify the other end of the transceiver display error messages

    Ø have FiberAlter, automatic cut-emitting optical path (open NMS) that receive light signals;
    Ø FX holding half / full duplex and link failure alarm switch selection;
    Ø Support UTP crossover Direct Connect adaptive, easy system commissioning and installation;
    Ø support SNMP network management rack, 2U chassis can be inserted 16 fiber optic transceiver cards
    Ø low power consumption. Low heat, stable operation for a long time;
    Ø single fiber can choose to expand the user's needs
    Technical Parameters

     u  Ethernet UTP Interface

        Interface rate:              10/100 M, half/full duplex auto-negotiation

        Interface Standard:      Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

        MAC Address Capability: 4096

        Connector:                  RJ45, support Auto-MDIX

    u   Optical Ethernet interface

        Wave Length:          1310nm, 1550nm

        Interface rate:              100 M, half/full duplex

        Interface Standard:      Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

        MAC Address Capability: 4096

        Connector:                  FC/SC

        Fiber Transmission Distance is limited by optical circuit loss and additional loss as a result of connectors, fittings and patch panel.

       Transmission distance may also be limited by fiber optic bandwidth.

    u   Power

        Power supply: AC180V ~ 260V;DC –48V;DC +24V

        Power consumption: ≤10W

    u   Dimension          

       Product size:   443 X365 X110mm(WXDXH)

       Piece weight:  5.5KG

    u  Working environment

        Working temperature: -10°C ~ 50°C
        Working Humidity:        5%~95 % (no condensation)

        Storage temperature:   -40°C ~ 80°C
        Storage Humidity:         5%~95 % (no condensation)

    Application Scheme

    Applications


    DataSheet Download
    
    网站地图