Warning: mkdir(): No space left on device in /www/wwwroot/new9.com/func.php on line 127

Warning: file_put_contents(./cachefile_yuan/65555501.com/cache/6d/f5ef2/f8668.html): failed to open stream: No such file or directory in /www/wwwroot/new9.com/func.php on line 115
Fiber Optical Multiplexer,Interface Converter,Network Switches,TDM over IP-Fctel Technology Co.,Ltd




  • 黄瓜下载官网,黄瓜AVAPP,黄色视频黄瓜视频,黄瓜视频在线观看入口

    Hello, Welcome to FCTEL Technology Co.,Ltd
    National service hotline:+086 0571-87007055/56/57 CN

    WE ONLY FOCUS ON TRANSMISSION AND ACCESS

    Products center

    Modular multi-service Fiber MUX

    Type:FC2PM-E16 Message

    Description:LCD PDH， 4FE，With 4 multifunction slots， with ALS function，Console or SNMP，1+1 Back up Optic fiber

    Product Description

            This device is modular structure point-to-point optical transmission equipment with LCD display, uses the FPGA chips and easy to upgrade. The Main board provide 4*100M channel Ethernet data and 2 AUX port which is for transmitting other data such as RS232/RS485/RS422, two optical interface for optional 1+1 auto protection switch (APS).

            4 slots of tributary with variant plug-in modules which included 4xE1 channels module, 4/8/16 x FXO/FXS module and 2x Nx64K V.35 module.The maximum capacity will be up 4 plug-in modules which could be combinations with above modules.The high flexibility, performance, is the best solution for voice/data/video services in existed market.

    Functional Properties

    Ø Provides total 16 E1 transparent transmission capacity ;

    Ø With char 16*2 LCD display and SNMP agent inside.

    Ø Provide Console manage interface(RS232)

    Ø Provice one hotline channel for option;

    Ø Provide two SFP fiber interfaces, one as master, the other as slave, insuring uninterrupted service transmission.

    Ø The rate of optical port is 155Mbps, transmission range can reach 25KM, 40KM, 60KM, 80KM or 100KM;

    Ø   Provide two fiber interface 1+1 protect（APS）function ,and ALS（Automatic Laser Shutdown/Reduction）function

    Ø   Provide 4 slots plug-in modules:

             u 4×unFramed E1 module（75Ω）/（120Ω）

             u 4×Framed E1 module（75Ω）/（120Ω）,any timesolts can be set

             u 4×FXO/FXS/EM2-4/Magnet telephones module

             u 8×FXO/FXS/2 line audio/Magnet telephones module

             u 16×FXO/FXS/2 line audio/Magnet telephones module

             u 2×V.35 (2.048M Fixed speed) module

             u 2×V.35 (N*64K N=1-32) module

             u 4×RS232/422/485 module

             u 4*FE to E1 bridge(wire speed 2.048M) module

    Ø Provide 4FE(wire speed 100M)Ethernet channel,support mutual negatiate, Ethernet bandwidth is set on base on multiple of 32K.;

    Ø Ethernet port supports full/half duplex, 10M/100M auto-ataptable;

    Ø Ethernet port supports VLAN function and has 4 devision mode for user selection;

    Ø Ethernet package size support 1916 byte and 4 Ethernet port could be set seperately;

    Ø Has complete alarm function and can monitor remote device status;

    Ø Supports E1 loop from remote so as to detect and manage device conveniently;

    Ø  The combination AC220V and DC-48V for redundant


    Technical Parameters

    u  Fiber

             Multi-mode Fiber

        50/125um, 62.5/125um,

        Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)Wave Length: 820nm

        Transmitting power: -12dBm (Min) ~-9dBm (Max)

        Receiver sensitivity: -28dBm (Min)

        Link budget: 16dBm

            Single-mode Fiber

        8/125um, 9/125um

        Maximum transmission distance: 40Km

        Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

        Wave Length: 1310nm

        Transmitting power: -9dBm (Min) ~-8dBm (Max)

        Receiver sensitivity: -27dBm (Min)

        Link budget: 18dBm  

    u  E1 Interface

        Interface Standard:      comply with protocol G.703;
        Interface Rate:             n*64Kbps±50ppm;
        Interface Code:            HDB3;

        E1 Impedance:             75Ω (unbalance), 120Ω (balance);

        Jitter tolerance:            In accord with protocol G.742 and G.823

        Allowed Attenuation:   0~6dBm

    u  Ethernet interface(100/100M)

        Interface rate:              10/100 Mbps, half/full duplex auto-negotiation

        Interface Standard:      Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

       MAC Address Capability: 4096

        Connector:                  RJ45, support Auto-MDIX

    u  FXS phones Interface

        Ring voltage: 75V

        Ring frequency: 25HZ

        Two-line Impedance: 600 Ohm (pick up)

        Return loss: 40 dB

    u  FXO Switch Interface

        Ring detect voltage: 35V

        Ring detection frequency: 17HZ-60HZ

        Two-line Impedance: 600 Ohm (pick up)

        Return loss: 40 dB

    u  EM 2/4 Line

        AD: 0dB

        DA: -3.5dB

        Two/Four-line Impedance: 600 Ohm

        Return loss: 20 dB

    u   Power

        Power supply: AC180V ~ 260V；DC –48V；DC +24V

        Power consumption: ≤10W

    u   Dimension          

        Product Size:         216X140X31mm(WXDXH)

           Piece Weight :    1KG

     u  Working environment

        Working temperature: -10°C ~ 50°C
        Working Humidity:        5%~95 % (no condensation)

        Storage temperature:   -40°C ~ 80°C
        Storage Humidity:         5%~95 % (no condensation)

    Application Scheme

    Applications


    The motherboard provides:
          1. LCD display;
          2.4-way wire-speed 100M shared Ethernet channel;
          3.2-way transparent RS232 / 422/485 asynchronous channels;
          4.1 channel public telephones
          5. SNMP network management
     
    4 slot, supports mixed insertion, provide:
              u  4 × E1 module (75Ω) / (120Ω)
              u  4 × framing E1 module (75Ω) / (120Ω), you can set an arbitrary time slot
              u  4 × FXO / FXS / EM2-4 / magnet module
              u  8 × FXO / FXS /2 wire audio / magnet module
              u  16 × FXO / FXS /2 wire audio / magnet module
              u  2 × V.35 (2.048M fixed rate) module
              u  2 × V.35 (N * 64K N = 1-32) module
              u  4 × RS232 / 422/485 / switch module
              u  4 Ethernet bridge (rate 2.048M) module
    As above, if you want to achieve 8E1 + 4FE + 32-way telephones (FXO / FXS) function, you can configure two 4E1 cards, two 16xFXO / S telephones cards

    DataSheet Download
    
    网站地图