Warning: mkdir(): No space left on device in /www/wwwroot/new9.com/func.php on line 127

Warning: file_put_contents(./cachefile_yuan/65555501.com/cache/05/8fca8/1ac2c.html): failed to open stream: No such file or directory in /www/wwwroot/new9.com/func.php on line 115
Fiber Optical Multiplexer,Interface Converter,Network Switches,TDM over IP-Fctel Technology Co.,Ltd




  • 黄瓜下载官网,黄瓜AVAPP,黄色视频黄瓜视频,黄瓜视频在线观看入口

    Hello, Welcome to FCTEL Technology Co.,Ltd
    National service hotline:+086 0571-87007055/56/57 CN

    WE ONLY FOCUS ON TRANSMISSION AND ACCESS

    Products center

    1*V.35 over ethernet(IP)

    Type:FCT-V35 Message

    Description:TDMoverIP-V.35 is mainly used for transmitting V.35 signal over IP network.It has 1 V.35 port 2 FE electrical port 1 FE optical port 1 Console Management Interface. Support web network management.

    Product Description
    TDMoverIP equipment is mainly used for transmitting V.35 signal over IP network. Enables operators and enterprises to seamlessly and reliably connect TDM devices and user Ethernet on a standard low-cost wireless or wired Ethernet / IP structure but no impact on quality. TDM over IP transparent to TDM signals ensures that any device with a physical V.35 interface is seamlessly connected such as the PBX mobiles station SS7 signaling device and voice mail system. Can be used in IP-based communication systems such as: LAN WAN MAN and wireless networks.
     
    With 1 V.35 port 2 FE electrical port 1 FE optical port 1 Console Management Interface
    Functional Properties
    ◆Provide Console (CLI) and WEB management interface convenient for installation;
    ◆ Provide a V.35 circuit two FE electrical port a FE SFP optical port;
    Transparent transmission of V.35 signals over IP networks complies with ITU-T V.35 regulations
    ◆ clock recovery using a unique clock algorithm stable frequency slight jitter and drift;
    ◆ Provides three kinds of loopback function: Ethernet local loopback (ANA) V.35 local loopback (DIG) V.35 remote loopback (REM);
    ◆ Pseudo-random code test function easy to open the circuit can be used as a 2M BER tester to use
    ◆ V.35 interface supports hot swap; support and DTE or DCE device interconnection
    ◆ V.35 working clock can support the internal clock external clock line clock;
    ◆ High transmission efficiency low transmission delay; Ethernet packet length can be set to support long packets; Support VLAN settings;
    ◆ support V.35 link packet loss indication function;
    ◆ high transmission efficiency up to 90% bandwidth utilization efficiency;
    ◆ Support WEB network management software and hardware online upgrade locally and remotely;
    ◆ a variety of power options: AC220V DC-48V / DC24V etc .;
    Technical Parameters
    ◆  E1 Interface
        Interface Standard:      comply with protocol G.703;
        Interface Rate:             n*64Kbps±50ppm;
        Interface Code:            HDB3;
        E1 Impedance:             75Ω (unbalance) 120Ω (balance);
        Jitter tolerance:            In accord with protocol G.742 and G.823
        Allowed Attenuation:   0~6dBm
    ◆  Ethernet interface (10/100M)
        Interface rate:              10/100 Mbps half/full duplex auto-negotiation
        Interface Standard:      Compatible with IEEE 802.3 IEEE 802.1Q (VLAN)
        MAC Address Capability: 4096
        Connector:                  RJ45 support Auto-MDIX
    ◆  Power
        Power supply: AC180V ~ 260V；DC –48V；DC +24V
        Power consumption: ≤10W
    ◆  Dimension          
        Product Size: Mini Type    216X140X31mm(WXDXH)
                Simple packaging:   274X193X84mm(WXDXH)
                Piece Weight :    1.25KG 
    ◆  Working environment
        Working temperature: -10°C ~ 50°C
        Working Humidity:        5%~95 % (no condensation)
        Storage temperature:   -40°C ~ 80°C
        Storage Humidity:         5%~95 % (no condensation)
    Application Scheme
    DataSheet Download
    
    网站地图